SeaDoo GSI Instruções de Operação descarregar pdf (Página 66)

All Models

Start the engine then immediately

open the water tap.

Run the engine about 3 minutes at a

fast idle around 3500 RPM.

Pull plug from air intake silencer cover.

Spray BOMBARDIER LUBE lubricant

through air intake silencer cover keep-

ing engine at fast idle.

1. Air intake silencer cover

2. Pull plug

3. Spray BOMBARDIER LUBE here

NOTE: Lubrication of engine

should be done for at least 1

minute. After approximately half a

minute, close fuel valve to run engine

out of fuel while lubricating.

Close the water tap then stop the en-

gine.

Disconnect the garden hose.

SP/SPX/GTS

Unlock and remove coupler hose. Re-

install dust cap over fitting spigot.

Remove hose pincher from water out-

let hose.

All Models

Wipe up any residual water from the

engine.

Remove spark plug cables and con-

nect them on the grounding device.

◆

WARNING

Do not touch any electrical parts

or jet pump area when engine is

running.

CAUTION

Never flush a hot engine. Always

start the engine before opening

the water tap. Open water tap im-

mediately after engine is started

to prevent overheating.

F01F25Y

CAUTION

When engine begins to run irreg-

ularly because of fuel starvation,

immediately stop water flow be-

fore engine dies.

CAUTION

Always close the water tap be-

fore stopping the engine.

smo9701a.bk : smo9701b.fm5 Page 64 Monday, November 3, 1997 9:54 AM

www.SeaDooManuals.net

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 104 105

Comentários a estes Manuais

Sem comentários

SeaDoo GSI Instruções de Operação Página 66

Comentários a estes Manuais

Manuais e produtos relacionados com Motor SeaDoo GSI