SeaDoo GS Instruções de Operação descarregar pdf (Página 38)

100

34) Flushing Connector

(if so equipped)

A convenient connector is provided to

allow easy installation of a garden hose

to flush the cooling system.

Refer to POST-OPERATION CARE sec-

tion for proper use.

35) Bilge Drain Plugs

Should water be found in the bilge, it

can be easily drained by unscrewing

the drain plugs.

CAUTION: Make sure drain plugs

are properly secured prior to launch-

ing the watercraft in water.

1. Unscrew

2. Tighten

Tilt the watercraft slightly to the rear

so that the water can completely flow

out of the bilge.

36) Jet Pump Nozzle

Jet pump nozzle turns side to side via

rider input at the handlebar. This pro-

vides directional control when engine

is running.

37) Reverse Gate

(if so equipped)

When selecting the neutral or reverse

position with the shift lever, the re-

verse gate moves up or down to obtain

the desired position.

38) Jet Pump Water Intake

The water is drawn up by the impeller

through this opening. The water intake

grate minimizes the entry of foreign

objects into the propulsion system.

TYPICAL

1. Water intake



WARNING

Never use nozzle as a supporting

point to board the watercraft or to

lift it.

F02L2FY



WARNING

Never use gate as a supporting

point to board the watercraft. Do

not reverse while at speed.

F01J3ZY

smo2001-002a.book Page 36 Wednesday, June 7, 2000 3:57 PM

www.SeaDooManuals.net

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 99 100

Comentários a estes Manuais

Sem comentários

SeaDoo GS Instruções de Operação Página 38

Comentários a estes Manuais

Manuais e produtos relacionados com Motor SeaDoo GS