SeaDoo GS Instruções de Operação descarregar pdf (Página 59)

57

POST-OPERATION CARE

General Care

Remove the watercraft from the wa-

ter every day to prevent marine organ-

isms growth.

Should any water be present in the

hull, unscrew the drain plugs and tilt

the watercraft to the rear in order to

allow water to flow out.

Wipe up any remaining liquid in the en-

gine compartment (bilge, engine, bat-

tery, etc.) with clean dry rags (this is

particularly important in salt water

use).

Additional Care for Foul

Water or Salt Water

When the watercraft is operated in

foul water and particularly in salt wa-

ter, additional care must be taken to

protect the watercraft and its compo-

nents. Rinse bilge area with fresh wa-

ter.

Cooling System Flushing

and Engine Internal

Lubrication

Flushing the cooling system with

fresh water is essential to neutralize

corroding effects of salt or other chemi-

cal products present in water. It will

help to clean up sand, salt, shells or

other particles in water jackets (en-

gine, exhaust manifold, tuned pipe)

and/or hoses.

Engine lubrication and flushing should

be performed when the watercraft is

not expected to be used further the

same day or when the watercraft is

stored for any extended time.

Proceed as follows:

Clean jet pump by spraying water in its

inlet and outlet and then BOMBAR-

DIER LUBE lubricant.

SPX and GTS Models

Remove seat to allow access to cool-

ing system.

Remove dust cap from fitting spigot

and attach coupler hose (P/N 295 500

258). Make sure coupler hose is prop-

erly locked to fitting spigot.

Install a hose pincher on water outlet

hose.

NOTE: This prevents water from di-

rectly exiting cooling system.

SPX MODEL

1. Fitting spigot

2. Coupler hose

3. Hose pincher

-

CAUTION

Failure to perform proper care

such as: watercraft rinsing, cool-

ing system flushing and anticor-

rosion treatment, when water-

craft is used in salt water, will re-

sult in damage to the watercraft

and its components. Never leave

the watercraft stored in direct sun-

light.

◆

WARNING

Perform this operation in a well

ventilated area.

F01E28Y

3

12

Smo9901b.fm Page 57 Friday, September 4, 1998 10:45 AM

www.SeaDooManuals.net

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 108 109

Comentários a estes Manuais

Sem comentários